Back in 2010, the ARRL announced the official vest we are supposed to wear:
ARES members, while activated, deployed, in community service activities or otherwise on duty shall wear over their normal apparel, at minimum, a florescent green ANSI Class 2 reflective, 100% polyester vest. The vest shall be decorated in the following manner:
On the Back:
In minimum 2” lettering, Arial Black font, black in color, imprinted above the horizontal reflective tape:
Those in a leadership position may add their title (SEC, DIRECTOR, EC, PIO, etc) below the words “Emergency Communications” in not less than 3″ tall font, black. (Under the lower reflective stripe). Local jurisdictions may elect to add their organization name above the words “Amateur Radio” with no larger than 1″ Arial Black lettering, color black.
On the Front:
On the Left Chest, the ARES logo, minimum 3.5 inch diameter, black in color, negative background. The Right Chest shall remain blank so as to allow wearer to affix their ARES or ARRL name badge.
Vests may have zip or Velcro type front closures. Members may choose vests with or without pockets, at their own discretion. Other apparel, such as short and long sleeve tee shirts, jackets and coats are approved for member use as long as the garments meet the same color, ANSI Class 2, lettering and decoration standard. A waiver of this standard may be given by an SEC for specific purposes with good cause.
Florescent green is the same as fluorescent yellow, which is what most vendors call it.
The League sells a mesh vest, but the quality is questionable if you expect to use them frequently. They also have a solid vest, which is a bit more solid, but I think those of us that have them find they are not a lot better (I have gone through two vests in a year).
Andy, KJ4MTP, Tom, W4PIO and I have moved to a sturdier surveyor’s style vest. I can report that it has survived a couple of washings already, which is more than the League’s vests did. The problem with the non-league supplied gear is having to be handy with a needle and thread, or know someone who is, and pick up the associated panels.
Until and unless the SEC himself (herself), says I cannot wear the sturdier (and more visible) vest (which complies to the fire department standards), I will continue to wear the surveyor’s style and I will approve it for our use in all field deployments.
- David’s Vest: https://www.fullsource.com/radians-sv55-2zgd/
- Tom Vest: https://www.police-supplies.co.uk/protec-medvest8
- Andy’s Vest: https://www.police-supplies.co.uk/carriage-systems/modular-tac-vests/Protec-velcro-modular-vest
- Badges: https://www.police-supplies.co.uk/tactical-clothing-and-footwear/badges/custom-velcro-badges
- Badges: https://www.copquest.com